How to Spray Mount a Poster Step 1. Step 3. Align the corners and edges to make sure they are even before proceeding. From a teenager's favorite movie poster to a poster illustrating a key concept for a presentation, spray mount any poster to achieve attractive results. Spread the newspapers over a flat work surface to prevent spraying beyond the poster's edges. Hold your iron or dry mount press there for about 5 minutes so the heat warms up the photo, dry mount tissue and mounting board. Spray adhesive dries quickly, but you have about 30 seconds before it bonds to smooth out wrinkles and straighten edges. There are many methods available for mounting photographs or artwork before framing. Hold the aerosol adhesive spray approximately 8 to 10 inches away from the poster and spray the adhesive evenly over the entire backside surface of the poster. Using a simple mounting technique, you can quickly mount your poster so that it looks neat and professional on the mounting board for any display purpose. Consult the label of the adhesive before you use it to make sure the manufacturer recommends its use for mounting posters. Start at one edge and smooth the fabric over the piece you want it to adhere to. Apply and... Join the pieces. Try perfecting your technique on cardboard. Spray mount to me is the Devil’s work. Fortunately, there are some easy tips for removing spray adhesive from various surfaces without damaging your hard work. Pull the corners of the photo up carefully after the middle is firmly attached to the mounting board and remove the tape before adhering the edges to the board. Stick Together: How to Properly Use Super 77 Spray Adhesive: Sticking things together can be a pain sometimes, especially if you are using inferior adhesives. Applying a Spray Adhesive Shake the can well and do not tilt it upside down. Place the mounting board beside the newspapers with the top of the mounting board facing up. What Are Watercolor Wall Paint Techniques?→, Take the wrinkles & creases out of art on paper framing→. Hatter has also had publication on home improvement websites such as Redbeacon. After you’re sure you can provide nice even coverage, you can move on to painting the walls. You can get a can of good spray adhesive ( 3M Super 77 for about $15) and save many, MANY puzzles. Remember, most spray adhesives bond almost instantly, so repositioning will not be possible. Once you affix the poster securely and smoothly, you can display the poster without worry of the poster rolling back up, wrinkling or suffering damage. Now I will never go back. This technique is relatively permanent and should be combined with matting your artwork in order to guarantee a lasting seal. Peel back half of the batting and spray the batting with temporary spray adhesive. Spray a light mist all over the mount and gently comb into the hair. Place guide-marks on your mount or backing board. Allow the poster to dry on the mounting board, consulting the aerosol adhesive spray label for drying times. Then hold the can six to eight inches away from a piece of newspaper or cardboard. If you're doing this indoors, be sure to protect the area behind the print from over-spray. Gorilla Spray Adhesive is heavy duty, multi-purpose and Gorilla Spray Adhesive is heavy duty, multi-purpose and easy to use. $10+ to save just ONE puzzle. For example, if your piece is 20 by 25 cm (8 inches by 10 inches) in size, your backing board should be 27.5 by 30 cm (11 by 14 inches). As a regular contributor to Natural News, many of Hatter's Internet publications focus on natural health and parenting. Spray the adhesive glue in a well ventilated area. Be aware that spray adhesive should only be used in a well ventilated area and can be damaging to your lungs when inhaled. Spray adhesive makes a great substitute for liquid glue in many crafts, as well as numerous household projects and repairs. That’s pretty expensive. After shaking the can of adhesive, spray the back of your piece, making sure to coat the edges. You may want a second set of hands to properly center the puzzle on the foam core. I gauge this by the type of batting I use. In addition, Fausek has immersed herself in various hobbies including gardening, needlecraft and jewelry making. Using spray adhesive does not allow for repositioning, so you want to make sure your marks are easily seen. Other options will leave your poster pristine and make for an attractive display. Place both palms into the center of the poster. You can use any kind of material as long as it is big enough to cover the surface. Create your cover by decorating your binder, journal or scrapbook with paint, markers, paper or any other material you would like to use. Place waxed paper over a flat surface. Hold the can 10–12 in (25–30 cm) away from the model and spray in quick, even strokes until you’ve covered the entire model. Pick up your artwork or photo carefully by the corners. For 100% cotton batting, use spray sparingly. Spray the foam core with adhesive glue, and then place the puzzle on top. This will centre a 20 by 25 cm (8 by 10 inch) piece on a 27.5 by 30 cm (11 by 14 inch) backing board. For example, most photos are matted centred on the backing, so you would measure 3.75 cm (1.5 inches) from the top and bottom of your board and place a mark or line there. Use a white, spray primer if you need to prime a surface. Some aerosol adhesives are not suitable for mounting posters. Hold the can in an upright position, pointing the valve toward the surface to be bonded. Use the correct type of adhesive for your project, so that you can avoid unwanted results. Align the can's nozzle arrow with the red or other color dot on the can. Starting at the centre, gently smooth the piece down onto the backing board, removing any bubbles or possibility of wrinkles. Choose a well-ventilated area to allow the fumes to circulate properly. There are several types of spray adhesives to choose from. This is a standard frame size for that size artwork and will need a mat to cover the art before framing. Mounting a poster on foam board not only gives it a stable backing but also makes display and framing much easier. Wait 24 hours for the primer to settle. What Kind of Paint Can You Use on Foam Core Board? If you notice any bug damage or find “rice-crispy” looking sheds on a mount, take it outside and spray it down with a bug killer and seal it in a plastic bag overnight. The fumes from aerosol adhesives are toxic. Cut your mount or mat board to size. Smooth the entire poster from the center point out to the edges on all sides. Wait 2 to 3 minutes after spraying (consult product instructions for details on drying times). For example, most photos are matted centred on the backing, so you would measure 3.75 cm (1.5 inches) from the top and bottom of your board and place a mark or line there. It’s messy, smelly, toxic, and it is a bug magnet! The glue... Cleanup and storage. Your mount-board should be ready before you spray the print. I've ruined a few really … In most cases, you will want the board to be at least 7.5 cm (3 inches) wider and longer than your artwork. Use spray adhesives for simple and even application. The most common place to use adhesive in picture framing is attaching the photo to the mount board or mat board, depending on the method you choose. Measure your photo or artwork. With a degree in photography, she ran her own business for more than 15 years. Use the aerosol adhesive in a well-ventilated area (outdoors is best). There are many methods available for mounting photographs or artwork before framing. Before you use a spray adhesive, you need to properly set up the area you will use. Acid free or photo safe spray mount. This will provide you with a place-mark you will use to put your artwork in place. Based in Wisconsin, Danita Fausek’s 30-year working career includes jobs in administration, construction, remodeling, teaching quality processes and art classes, and event planning. Place the item to be glued on top of the covered surface. Place the poster onto the newspapers with the backside facing up. Place the mounting board beside the newspapers with the top of the mounting board facing up. This type of adhesive is sprayed on to the surface to be bonded. Place guide-marks on your mount or backing board. If the poster wants to roll up, hold it securely with small weights at the corners. I’ve used newspaper, craft paper, wrapping paper, and even a thin roll of cork. Place your photograph upside down and spray the adhesive on it. Kathryn Hatter is a veteran home-school educator, as well as an accomplished gardener, quilter, crocheter, cook, decorator and digital graphics creator. Set the adhesive aside. Place your piece face down on the paper. Scotch Photo Mount and other spray adhesives are a little cleaner and easier alternative to wet mounting. Lift the poster carefully and flip it over. Position the photograph on the mount board and smooth it down from the center to the edges using your hand or a brayer. You can ensure better coverage by spraying once horizontally and once vertically. Dry mounting is traditional, but is a pain and requires specialized gear and skills--especially with large prints which have to be done in sections. There are many different photo mounting techniques , each using a different type of adhesive: hinging tape or tissue , spray adhesive , and wheat or rice starch paste. Then holding the can about 6 to 8 inches from the print, spray the entire back of the print. Position the poster over the mounting board in the position you desire. On a table or workbench, place newspapers, cardboard or cloth enough to cover and protect the surface. My prints on foam-core are free of bubbles, dust, bugs, creases and other flaws, and they are smooth and professional looking. While you could use regular craft glue, there’s a high risk of damaging the poster and leaving wrinkles and ridges. Painting with a sprayer takes a little practice. Make sure you have an accurate measurement both horizontally and vertically of your piece before starting. Press and move your palms outward toward the edges of the poster to affix the poster smoothly to the mounting board. The waxed paper should be larger than your artwork to catch any over-spray. Gently place the piece face up within the marks you have made on your mounting board. Another option is to mount it onto a sheet of heavy card stock. Spray adhesive is a highly popular form of adhesive, which is available in cans.